Simon Trümpler - VFX Sketchbook

Personal Work
#306

A new version. All elements (sphere, ring, smoke, fire, drips, puddle) use the same shader. The drips & circle are inspired by Alex Fedorov: Sketch #20 WIP @AlexFedorov

preview:
sae2022_vfx_02_small

7 Likes
#307

Here are some more small effect using the same shader (see above). The idea is to be able to create many different effects (projectile trails, collectible glare, scifi barriers, …) with the same shader.

sae2022_vfx_02_axe

5 Likes
#308
  • puddle below fire orb is now less bright and i added some subtle smoke
  • new simple waterfall + waterrings + watersplashes
5 Likes
#309

I find it hard to believe the waterfall and the fireball (or is a fire wisp?) are using the same shader, really interesting stuff there.
I can see this is some sort of continuation to your “How to not create textures” talk.
Thank you for sharing these.

I’m a newbie so if you’d allow me to ask: how is that fire projectile making that smooth up and down motion? Is it some ribbon magic, or something else?

#310

Hi :slight_smile:

The “secret” of the projectile is a sine-shaped texture and a trail which is thin at the start and then quickly scales to it’s defined width. The principle is basically the same like here for the angel wings: sine texture on a plane where one part is scaled down → nice wiggly motion (Diablo 3 – Wings of Angels | Simon schreibt.)

In addition the trail uses UV distortion BUT

  1. only for the vertical UVs (meaning only for V, not for U)
  2. The distortion intensity gets stronger over time (so at the start of the trail there is no uv distortion and at the end of the trail it’s full intensity). This makes the trail move the “older” the ribbon particles get.
5 Likes
Azeros' Sketchbook
#311

The Project FIles are now available! https://www.artstation.com/artwork/4XLk04
artstation_thumbnail_small

10 Likes
Flying's Sketch Book
#312

Simon, I’m studying what you did in there and it’s a really amazing resource to learn! I’m VERY grateful for these files.
I’ve a question regarding LUT coloring and another regarding dynamic parameters.

  1. I’m usually coloring my particles inside the niagara systems using color curves which is the opposite from what you’re doing in your project. Is it preferable to build the coloring in the material itself?

(EDIT) Ok just as I finished typing this I figured you don’t want to map your texture to the particle age, what you’re doing is basically a color remap (duh), and I don’t see how that would be possible in the niagara system itself.

  1. I spotted this interesting node here “Particle relative time”
    image
    image906×330 60 KB

    So, what I was usually doing is using dynamic parameters to drive behaviors like distortion over time, so there a particular reason not to use dynamic parameters?

I’ve no industry experience (YET!) so I’m just looking to learn the workflows from the pros, and sorry for the long post.

2 Likes
#313

Hi,

thanks for your interest and the questions!

  1. Yes, my coloring is a bit more complex by using a LUT BUT I multiply the LUT result also by the particle color. So a simple “color over time” is possible as well as a LUT * color over Time. During the class I also explained that I’d use a Curve Atlas in Unreal because then you can edit your “lut” in Unreal instead of saving/reloading textures all the time but the students used a custom engine without the ability for Curves/Curve Atlas so I showed tha “traditional” approach.

    image
    image1571×843 203 KB

  2. Yes, you’re totally correct using a dyn param because it allows you way more control. In my case, I knew I only need a linear interpolation (instead of custom values via curve) and so the setup is a bit easier because in Niagara you don’t need to setup anything. Just setting the checkbox for UV Distortion over Time in the Material is enough and it just works. But yes, for more control a custom parameter is nice. But here I tried to keep it as simple as possible.

Hope that helped! :slight_smile:

6 Likes
#314

Stencil Buffer Test with a small extra detail: Elements can leave the stencil area.

This is done by adding everything in front of the card to the stencil mask. For this to work I store pos + front facing vector via Blueprint:

image
image1299×421 107 KB

In the material I then mask out the front/back area of the card with a simple dot product:

image
image1611×785 184 KB

Little list of inspirations for later:

Dragon Breath:

17 Likes
#315

Some more tests.

The hole in the ground uses several ingrediants:

  1. A disc (which uses the same world pos based material as the ground) hovers slightly above the ground and renders into the custom stencil buffer.

  1. A cylinder geo (with translucent material) “hides” below the ground BUT is visible because I disabled Depth Testing (1). This means it’s now visible on top of everything BUT by showing it only were the disc wrote into the stencil buffer (2), I can avoid weird artifacts. For a smoother transition I fade the cylinder a bit on top (3).

image
image1153×389 114 KB

image
image1433×477 142 KB

I also played around with Unreal Geometry Script & Blender Geometry nodes. Summary: It’s cool but generating good UVs is almost impossible with Unreal Geometry Script (or I missed the some nodes).

In Blender it’s cool (but also a bit complicated) like in Houdini but the actual annoying part: The UVs are not directly saved into the mesh. This means I need to convert my spline (from which all geo is generated) into a mesh, manually copy my uv attribute into a uv map and only then i can export. This is a bit annoying.

Below an example of how to convert a spline into a nice border mesh for my card.

blender_2022-12-11_01-43-40

image
image3625×848 243 KB

5 Likes
#316
  • Added ground textures (from a free library https://www.texturecan.com)
  • Added test anim for the card
  • Made my material work with dyn mat param so that I can control the uv offset via Niagara (and added some tests [yellow border, blue glare]

8 Likes
#317

Test with adding a swoosh while rotating the card:

The effect is a simple bulgy cylinder with a scrolling texture:

UnrealEditor_2022-12-19_00-51-03

15 Likes
#318

For someone learning this thread is invaluable, thank you Simon!

#319

Can you talk a little bit more about the depth test? I had a lot of problems!

#320

Just a tiny update. Test for moving a mesh along a spline:

@Mkhize thanks! :slight_smile:
@VFX1234 What problems did you have?

7 Likes
#321

Opaque Dragon test. It’s difficult doing this because only translucent objects can be masked by stencil. But making the dragon translucent looks sh*tty because of all the surfaces behind each other. So my approach:

  1. The card and the parts of the dragon in front of the card write into a stencil mask
  2. The ground is translucent, does NOT do a depth-test (so it’s rendered in front of everything) BUT is only shown where the stencil mask is NOT

5 Likes
#322

Hah, I’d throw my wallet at Riot if they started making cards like these in Runeterra, this is some next level trickery. Very cool effect.

1 Like
#323

Thanks @Azeros ! :slight_smile:

Small update:

  • added environment into the card
  • added interactivity: pressing 1 brings the card up, pressing 2 sends it to attack pos, pressing 3 triggers dragon attack

Problems:

  • Environment can’t have shadows because you’d see them on the background
  • Card can not cast shadows because it would also be visible on the dragon itself
  • While it’s not a problem having an animation just running, for some reason, when i trigger it per keypress, the stencil mask is laggy and at the dragons mouth you can see edges where the background environment gets visible a bit.
12 Likes
#324

Never cease to amaze us Simon! It’s always a pleasure to find your thread :smiley:

1 Like
#325

@SelicatoArt thank you! <3

Rough outline how the full sequence shall work. I’ll add a lot of impact/trails to the card itself and then the dragon shall spit a stream of fire (to the opposite side of the battlefield).

5 Likes